Optimization of the photocatalytic activity of CdO + CdTiO3 coupled oxide thin films obtained by sol-gel technique

In the preparation of CdO + CdTiO₃ polycrystalline thin films by the sol-gel method, the optical, structural and crystalline properties, as well as the photocatalytic activity (PA) depends strongly on the sintering temperature (Ts) of the films and of the Ti/Cd ratio used in the precursor solution. In this work, CdO + CdTiO₃ thin films were prepared using a Ti/Cd constant ratio in the precursor solution. The films were sintered at six different Ts in the 450-550 °C range, in an open atmosphere. The structure of the films was characterized by X-ray diffraction and the PA was evaluated by the photobleaching of methylene blue in an aqueous solution using a UV-vis spectrometer. The relative intensity of the diffraction peaks associated with CdO and CdTiO₃, change with the Ts. The better photocatalytic activities were obtained for the films sintered at 490 °C and 550 °C. When the CdO was removed from the films by chemical etching the PA decreased, showing the importance of coupling both oxides.