| 摆线传动试验中接触温度和摩擦系数的测量 |
| |
| 引用本文： | 倪禄田,李文,薛凤英,张炳华. 摆线传动试验中接触温度和摩擦系数的测量[J]. 鞍山科技大学学报, 1991, 0(2) |
| |
| 作者姓名： | 倪禄田 李文 薛凤英 张炳华 |
| |
| 作者单位： | 鞍山钢铁学院科研处(倪禄田)，鞍山钢铁学院机械系(李文，薛凤英) |
| |
| 摘 要： | 介绍在摆线传动的胶合模拟试验中接触温度和摩擦系数的测量方法,找出了接触温度、摩擦系数随载荷、速度、摩擦表面处理及润滑剂的变化规律。摩擦系数随载荷的增加而降低。采用特制摆线油承载能力的下限与上限分别是50~＃油的2.43～4.25倍;稳定运转时摩擦系数为0.04～0.048略高于50~＃机械油;油温最高时为100℃.试件表面磷化处理,胶合承载能力的上下限较不磷化可分别提高80～180％,摩擦系数由0.035降为0.029,油温最高为70℃.
|
| 关 键 词： | 胶合 接触温度 摩擦系数 |
Survey and Determination of Contact Temperature and Friction Coefficient in Scoring Testing Simulate Cycloidal Drives |
| |
| Ni Lutian,Li Wen,Xue Fengying,Zhang Binghua Dept. of Scietific Research Dept. of Machanical Engineering Institute Works. Survey and Determination of Contact Temperature and Friction Coefficient in Scoring Testing Simulate Cycloidal Drives[J]. Journal of Anshan University of Science and Technology, 1991, 0(2) |
| |
| Authors: | Ni Lutian Li Wen Xue Fengying Zhang Binghua Dept. of Scietific Research Dept. of Machanical Engineering Institute Works |
| |
| Affiliation: | Ni Lutian;Li Wen;Xue Fengying;Zhang Binghua Dept. of Scietific Research Dept. of Machanical Engineering Institute Works |
| |
| Abstract: | |
| |
| Keywords: | scoring contact temperature friction coefficient |
| 本文献已被 CNKI 等数据库收录！ |
