首页 | 本学科首页   官方微博 | 高级检索  
     检索      

红花籽油的环氧化工艺
引用本文:曹伟丽,杨丰科.红花籽油的环氧化工艺[J].应用化学,2013,30(6):638-642.
作者姓名:曹伟丽  杨丰科
作者单位:(青岛科技大学化工学院 青岛 266042)
基金项目:山东省自然科学基金,兰州大学功能有机分子国家重点实验室开放基金
摘    要:以双氧水为氧化剂,甲酸为氧载体,用强酸性阳离子交换树脂作催化剂,结合正交实验和单因素实验,确定红花籽油环氧化反应的最佳工艺条件为:在少量金属掩蔽剂乙二胺四乙酸二钠(EDTA)存在下,红花籽油、88%甲酸、30%双氧水和阳离子交换树脂的质量比为1∶0.244∶1.665∶0.035,在60 ℃下反应6 h,搅拌速度400 r/min,产品的环氧值可达到7以上。

关 键 词:红花籽油  环氧化工艺  阳离子交换树脂  双氧水  过氧甲酸  
收稿时间:2012-07-27
修稿时间:2012-09-04

Epoxidation Technology of Safflower Seed Oil
CAO Weili , YANG Fengke.Epoxidation Technology of Safflower Seed Oil[J].Chinese Journal of Applied Chemistry,2013,30(6):638-642.
Authors:CAO Weili  YANG Fengke
Institution:(Qingdao University of Science & Technology,College of Chemical Engineering,Qinghao 266042,China)
Abstract:Epoxidized safflower seed oil was prepared using hydrogen peroxide as oxidant, formic acid as oxygen carrier, and strong acidic cation exchange resin as catalyst. The optimized reaction conditions are:with the presence of ethylene diamine tetraacetic acid as stabilizer, the precursor ratio for m(safflower seed oil)∶m(88% formic acid)∶m(H2O230%)∶m(cation exchange resin) is 1∶0.244∶1.665∶0.035, the reaction temperature is 60 ℃, the reaction time is 6 h and the stirring rate is 400 r/min, the epoxy value is above 7.0.
Keywords:safflower seed oil  epoxidation technology  cation exchange resin  hydrogen peroxide  performic acid
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《应用化学》浏览原始摘要信息
点击此处可从《应用化学》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号