Velocity and turbulence measurements in combustion systems

A laser-Doppler velocimeter is used in the measurement of high-temperature gas flows. A two-stage fluidization particle generator provides magnesium oxide particles to serve as optical scattering centers. The one-dimensional dual-beam system is frequency shifted to permit measurements of velocities up to 300 meters per second and turbulence intensities greater than 100 percent.Exiting flows from can-type gas turbine combustors and burners with pre-mixed oxy-acetylene flames are described in terms of the velocity, turbulence intensity, and temperature profiles.The results indicate the influence of the combustion process on turbulence.List of Symbols A exit area of combustor or burner (m²) - A/F mass air-fuel ratio - D exit diameter of combustor or burner (m) - M mass flow rate of gases (kg/s) - N_D number of Doppler bursts used in each velocity measurement - Q volumetric flow rate at T_r (m³/s) - R exit radius of combustor or burner (m) - R_1/2 distance from centerline to radius where the velocity is one-half of the local centerline velocity (m) - Re exit Reynolds number based on cold flow, QD/A - r distance from centerline of flow (m) - T temperature (°C) - T_CL centerline temperature (°C) - T_r inlet (cold) air temperature of combustor or burner (°C) - T.I. turbulence intensity, - mean velocity (m/s) - U_i instantaneous velocity individually realized by LDV (m/s) - mean velocity at centerline of flow (m/s) - mean square velocity fluctuation (m²/s² - x distance along centerline downstream of exit (m) - absolute viscosity at T_r (kg/(ms)) - density at T_r (kg/m³)