Mechanically induced long-period fiber gratings on tapered fibers

The characteristics of a mechanically induced long-period fiber grating (MLPFG) made by pressing a pair of grooved plates over single-mode fiber tapers are analyzed. Fiber tapers with a waist length of 80 mm and diameter ranging from 90 to 125 μm, fabricated using the heating and puling method, were used. We observed that the resonance wavelengths shift toward shorter wavelengths as the fiber taper waist diameter is reduced. A maximum shift of 254 nm in the position of the resonance peaks was observed when the fiber diameter was reduced to 90 μm. This technique is particularly suitable for tuning the resonance wavelengths to shorter wavelengths below the limit imposed by the grooved plate period.