| 陶瓷材料电加工后变质层厚度的研究 |
| |
| 引用本文： | 李崇豪,赵向东.陶瓷材料电加工后变质层厚度的研究[J].江苏大学学报(自然科学版),1996(4). |
| |
| 作者姓名： | 李崇豪 赵向东 |
| |
| 作者单位： | 江苏理工大学汽车学院 |
| |
| 摘 要： | 通过对一种典型陶瓷材料──Ａｌ２Ｏ３－ＴｉＣ陶瓷的电火花线电极切割加工试验，分析在不同的工作液、不同的电加工参数下，对试件变质层厚度的影响，提出了减小变质层厚度的途径．
|
| 关 键 词： | 电火花线电极切割，氧化铝，碳化钛，参数／变质层厚度 |
Research on Deterioration Layer Thickness of Al_2O_3-TiC Ceramic Composite after EDM |
| |
| Li Chonghao, Zhao Xiangdong.Research on Deterioration Layer Thickness of Al_2O_3-TiC Ceramic Composite after EDM[J].Journal of Jiangsu University:Natural Science Edition,1996(4). |
| |
| Authors: | Li Chonghao Zhao Xiangdong |
| |
| Institution: | Li Chonghao; Zhao Xiangdong |
| |
| Abstract: | After the electrospark wire-electrode cutting test is made on atypical ceramic meterial-Al2O3-TiC ceramic composite, the authors analyzeseffect of various dieletric fluids and electric parameters on the thickness of deterioration layer and put forward the approach to the decreased thickness of the deterioration layer. |
| |
| Keywords: | electrospark wire-electrode cutting aluminium oxide titaniumcarbide parameters/thickness of deterioration layer |
| 本文献已被 CNKI 等数据库收录！ |
