首页 | 本学科首页   官方微博 | 高级检索  
     

ICF平面冷冻靶制备中充气速率效应
引用本文:林伟, 王凯, 黎军, 等. ICF平面冷冻靶制备中充气速率效应[J]. 强激光与粒子束, 2013, 25: 3243-3246. doi: 3243
作者姓名:林伟  王凯  黎军  刘元琼  唐永建  雷海乐
作者单位:1.中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621 900
摘    要:基于自主研制的平面冷冻靶打靶系统及微管注入法充气/冷冻技术,探讨了不同充气速率对平面冷冻靶制备的影响。研究表明:随着充气速率的减小,靶盒内氢气压强的变化速率越小,液化过程越明显,并且持续的时间越长;充气速率越小,越能准确测量液氢在该温度下的饱和蒸气压。同时,确定了最佳充气速率,建立了利用饱和蒸气压标定液氢温度的方法。研制的平面冷冻靶已经成功提供ICF物理实验。

关 键 词:惯性约束聚变   平面冷冻靶   充气速率   饱和蒸气压   温度标定
收稿时间:2013-07-22
修稿时间:2013-08-29

Effect of filling rates on preparation of planar cryotargets
Lin Wei, Wang Kai, Li Jun, et al. Effect of filling rates on preparation of planar cryotargets[J]. High Power Laser and Particle Beams, 2013, 25: 3243-3246. doi: 3243
Authors:Lin Wei  Wang Kai  Li Jun  Liu Yuanqiong  Tang Yongjian  Lei Haile
Affiliation:1. Research Center of Laser Fusion,CAEP,P.O.Box 919-987,Mianyang 621900,China
Abstract:On the homemade planar-cryotarget shooting system, we have studied the effect of different filling rate on preparing planar cryotargets. The results show that with slower filling rate, the variation of hydrogen pressure in target is small. Furthermore, the liquefaction procedure is more observable and the corresponding duration of time is longer. Slower filling rate is helpful for the accurate measurement of saturated vapor pressure of liquid hydrogen at that temperature. A calibration method based on the saturated vapor pressure is developed to in-situ determine the temperature of liquid hydrogen isotopes in the target cell, and an optimum filling rate of 0.8 mL/min is obtained. These studies are important to provide high-quality and reliable hydrogen-isotopic planar cryotargets for ICF physical experiments.
Keywords:inertial confinement fusion  planar cryotargets  filling rate  saturated vapor pressure  temperature calibration
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号