首页 | 本学科首页   官方微博 | 高级检索  
     检索      

光学相干层析成像用于微机电系统测量研究
引用本文:秦玉伟.光学相干层析成像用于微机电系统测量研究[J].激光技术,2013,37(5):664-667.
作者姓名:秦玉伟
作者单位:1.渭南师范学院 物理与电气工程学院, 渭南 714000
摘    要:为了对硅V型槽的结构进行测量,采用热光源谱域光学相干层析成像法,进行了理论分析和实验验证,取得了硅V型槽的1维深度和2维层析图像,获得了硅V型槽的深度、上部宽度和底部宽度数据分别为145.38m,212m和32m。结果表明,该测量结果与扫描电子显微镜测量值基本一致。这对微机电系统结构测量是有帮助的。

关 键 词:测量与计量    结构    光学相干层析成像    微机电系统
收稿时间:2012-11-27

Study on micro-electromechanical system measurement using optical coherence tomography
Abstract:In order to measure the structure of V-shaped silicon grooves, a thermal light spectral-domain optical coherence tomography was introduced. After the theoretical analysis and the experimental verification, 1-D depth image and 2-D cross-sectional image of V-shaped silicon grooves were obtained. Depth of 145.38m, top width of 212m and bottom width of 32m were gotten. The measured data was the same as the measured result of scanning electron microscope. The results are helpful for the measurement of micro-electromechanical system.
Keywords:
点击此处可从《激光技术》浏览原始摘要信息
点击此处可从《激光技术》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号