Application of Multivariate Calibration Techniques to HPLC Data for Quantitative Analysis of a Binary Mixture of Hydrochlorathiazide and Losartan in Tablets

New multivariate approaches have been applied to high-performance liquid chromatography (HPLC) with multiwavelength photodiode-array (PDA) detection. Multivariate calibration techniques such as partial least squares (PLS), principal component regression (PCR), classical least squares (CLS), and inverse least squares (ILS) was subjected to HPLC data for simultaneous quantitative analysis of synthetic binary mixtures and a commercial tablet formulation containing hydrochlorothiazide (HCT) and losartan potassium (LST). The combined use of HPLC and multivariate calibrations has been denoted HPLC–CLS, HPLC–ILS, HPLC–PCR, and HPLC–PLS. Successful chromatographic separation of the two active compounds and enalapril maleate, used as internal standard (IS), was accomplished by means of a 4.6 mm i.d. × 250 mm, 5 m particle, Waters Symmetry C₁₈ reversed-phase column and a mobile phase consisting of 60:40 acetate buffer (0.2 M, pH 4.8)–acetonitrile (v/v, 60:40). HPLC data based on the ratio of analyte peak areas to IS peak area were obtained by PDA detection at five-wavelengths (250, 255, 260, 265, and 270 nm). The HPLC–CLS, HPLC–ILS, HPLC–PCR, and HPLC–PLS calibration plots for hydrochlorothiazide and losartan potassium were constructed separately by using the peak-area ratios corresponding to the concentrations of each active compound. The HPLC multivariate calibrations obtained were tested for different synthetic mixtures containing HCT and LST in the presence of the IS. These multivariate chromatographic methods were also applied to a commercial pharmaceutical dosage form containing HCT and LST. The results obtained from the multivariate calibrations were compared with those obtained by use of another, classical HPLC method using single-wavelength detection.Revised: 29 September 2004 and 4 January 2005