Enhanced stability of symmetrical polymer electrolyte membrane fuel cell single cells based on novel hierarchical microporous-mesoporous carbon supports

Fuel cell electrodes were prepared from Pt nanocluster activated hierarchical microporous-mesoporous carbon powders. The carbon supports were synthesized from molybdenum carbide applying the high-temperature chlorination method. Six different synthesis temperatures within the range from 600 to 1000 °C were used for preparation of carbon supports. Thermogravimetric analysis, X-ray diffraction, low-temperature nitrogen sorption, and high-resolution scanning electron microscopy methods were used to characterize the structure of the electrode materials and symmetrical membrane electrode assemblies (MEAs). The MEAs prepared were used to conduct the proton exchange membrane fuel cell (PEMFC)single-cell measurements. The polarization and power density curves for single cells were calculated to evaluate the activity of the catalyst materials synthesized. The electrochemically active surface area (from 2.4 to 11.9 m² g^?1) was obtained in order to estimate the contact surface areas of platinum and Nafion® electrolyte. The values of the electrolyte resistance, polarization resistance, and cell degradation rate were calculated from electrochemical impedance spectroscopy data. The carbon materials synthesized within temperature range from 600 to 850 °C were found to be the most suitable supports for PEMFCs, having higher maximum power density values and better stability (cell potential degradation 240 μV h^?1) than commercial carbon-based (Vulcan XC72; 670 μV h^?1) single cells.