首页 | 本学科首页   官方微博 | 高级检索  
     检索      

超高速碰撞2024-T4铝靶产生的闪光强度测量
引用本文:张薇,唐恩凌,相升海,杨明海,李乐新,于辉.超高速碰撞2024-T4铝靶产生的闪光强度测量[J].强激光与粒子束,2011,23(12):53-54.
作者姓名:张薇  唐恩凌  相升海  杨明海  李乐新  于辉
作者单位:1.沈阳理工大学 装备工程学院, 沈阳 1 1 01 59 沈阳理工大学 装备工程学院, 沈阳 1 1 01 59
基金项目:国家自然科学基金,辽宁省教育厅科技计划项目
摘    要:为了研究超高速碰撞产生的闪光强度特征,利用建立的光学高温计测量系统并结合二级轻气炮加载系统,进行了2种实验条件下的超高速碰撞实验。每组实验使用2组光纤探头,1组为直接对准碰撞点安装,另1组为侧向对准碰撞点安装。通过实验所获原始数据的分析表明:在给定实验条件及光纤探头安装方案下,在405~633 nm波长范围内超高速碰撞2024-T4铝靶产生的闪光强度峰值随波长的增大而增强;在波长为667 nm附近闪光强度峰值减小。

关 键 词:超高速碰撞    碰撞闪光    高温计    闪光强度

Measurement of light flash intensity produced by hypervelocity impact of 2024-T4 aluminum target
Zhang Wei , Tang Enling , Xiang Shenghai , Yang Minghai , Li Lexin , Yu Hui.Measurement of light flash intensity produced by hypervelocity impact of 2024-T4 aluminum target[J].High Power Laser and Particle Beams,2011,23(12):53-54.
Authors:Zhang Wei  Tang Enling  Xiang Shenghai  Yang Minghai  Li Lexin  Yu Hui
Institution:1.School of Equipment Engineering,Shenyang Ligong University,Shenyang 110159,China
Abstract:In order to investigate the characteristics of light flash intensity produced by hypervelocity impact, experiments on hypervelocity impact of 2024-T4 aluminum target were conducted under two kinds of experimental conditions by using an optical pyrometer measurement system established and a two-stage light-gas gun loading system. Two sets of optical fiber probes were used in every experiment: one directed to the impact point, and the other laterally directed to the impact point. Under the given experimental conditions and optical fiber probe schemes, the analysis of acquired original data show that the peak value impact light flash intensity increases with the wavelength increasing in the range from 405 to 633 nm during the hypervelocity impact of 2024-T4 aluminum target, and it d
Keywords:impact light flash  pyrometer  light flash intensity
本文献已被 万方数据 等数据库收录!
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号