首页 | 本学科首页   官方微博 | 高级检索  
     

一种采用干涉仪测量光电稳瞄系统稳定精度的方法研究
引用本文:刘海波,王晶,刘召庆,胥青青,侯利冰. 一种采用干涉仪测量光电稳瞄系统稳定精度的方法研究[J]. 应用光学, 2015, 36(5): 679-683. DOI: 10.5768/JAO201536.0501003
作者姓名:刘海波  王晶  刘召庆  胥青青  侯利冰
作者单位:1.海军驻汉中地区航空军事代表室,陕西 汉中723213;
基金项目:国防基础科研计划资助(A0920132001)
摘    要:为了满足未来高精度光电稳瞄系统rad级稳定精度的测试需求,提出一种基于干涉仪测量的稳定精度测试方法。基于泰曼格林干涉仪中同源两光束光程差对干涉条纹的影响,利用CCD观察干涉条纹的微小变化,实现稳定精度测试。采用该测试方法对快速转向镜(fast steering mirror,FSM)的指向精度和某型光电稳瞄产品稳定精度进行了测试研究,结果表明,该方法对稳定精度的测量精度可以达到0.2 rad。

关 键 词:干涉仪   光电稳瞄系统   FSM   稳定精度

Measurement for stabilization precision of EO stabilized sighting system utilizing interferometer
Affiliation:1.Military Delegate Office of Naval Aviation in Hanzhong district,Hanzhong 723213,China;2.Xi’an Institute of Applied Optics,Xi’an 710065,China
Abstract:In order to meet the testing need of rad level stabilization accuracy of high-precision EO stabilized sighting system in future,a method for testing the stabilization precision based on interferometer was proposed. According to the influence of the optical path difference of the two beams with the same source in the Twyman-Green interferometer on the interference fringe,the slight change of the interference fringe was observed utilizing the charge coupled device (CCD),as a result, the measurement of the stabilization precision was realized. By utilizing this measuring method, the aiming precision of the fast steering mirror (FSM) and the stabilized precision of a certain type of EO stabilized product were measured . Results show that the measurement precision can achieve 0.2 rad with our method.
Keywords:
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号