同步辐射压弯镜重力补偿方法 |
| |
引用本文: | 黄智超,程建高,李飞,张磊,王克逸.同步辐射压弯镜重力补偿方法[J].强激光与粒子束,2018,30(8):085102-1-085102-5. |
| |
作者姓名: | 黄智超 程建高 李飞 张磊 王克逸 |
| |
作者单位: | 中国科学技术大学 精密机械与精密仪器系, 合肥 230026 |
| |
基金项目: | 国家重点研发计划项目2016YFA0401300 |
| |
摘 要: | 介绍了同步辐射压弯镜重力引起的面型斜率误差及评价标准。根据梁的弯曲理论,提出了力矩加多点力补偿重力的方法,以上海光源XAFS光束线(BL14W)中的压弯镜为例,计算出力矩加两点力、力矩加三点和力矩加四点力补偿的最小斜率均方根误差分别为0.092,0.041,0.022 μrad。补偿结果的对比表明,当镜子两端有力矩补偿时,各补偿力相应减小,力矩加两点力、力矩加三点力和力矩加四点力补偿的面型斜率误差分别为没有力矩补偿时的52%,61%,68%。力矩加多点力补偿重力的方法明显优于多点力补偿重力的方法。
|
关 键 词: | 压弯镜 重力补偿 力矩加多点力 面型误差 同步辐射 |
收稿时间: | 2018-03-13 |
Gravity compensation for bent mirror of synchrotron radiation |
| |
Institution: | Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, Chin |
| |
Abstract: | Slope error and evaluation criteria of bent mirror of synchrotron radiation induced from gravity are introduced.According to the bending theory of beam, a method of gravity compensation by couple combined with multi-point forces is proposed.Taking the bent mirror of the XAFS beam-line (BL14 W) at Shanghai Synchrotron Radiation Facility (SSRF) as an example, the minimum root mean square (RMS) slope error of the bent mirror under the action of two-point, three-point and fourpoint forces combined with couples are calculated, and the result is 0.092, 0.041 and 0.022μrad, respectively.The comparison between the compensation results shows that when a couple is applied to both ends of the mirror, the corresponding compensation forces decreases, and the slope errors of the couple combined with two-point, three-point and four-point forces are 52%, 61%and68% of those without couples.Obviously, the compensation method of couples combined with multi-point forces is better than the multi-point forces compensation method. |
| |
Keywords: | |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|