Visualisation of flow boiling heat transfer in a microtube |
| |
Authors: | G P Celata M Cumo D Dossevi R T M Jilisen S K Saha G Zummo |
| |
Institution: | (1) ENEA, Rome, Italy;(2) University of Rome “La Sapienza”, Rome, Italy;(3) University of Nantes, Nantes, France;(4) Eindhoven University of Technology, Eindhoven, The Netherlands;(5) Bengal Engineering and Science University, Howrah, West Bengal, India; |
| |
Abstract: | This paper presents the results of the flow boiling patterns and heat transfer coefficients of FC-72 in a small tube. The
internal diameter of the tube is 0.48 mm, with a heated length of 73 mm. The mass flow rate varies from 50 to 3,000 kg/m2-s. The microtube is made of Pyrex in order to obtain the visualisation of the flow pattern along the heated channel. Different
types of flow pattern have been observed: bubbly flow, deformed bubbly flow, bubbly/slug flow, slug flow, slug/annular flow,
and annular flow. The experiments show the presence of flow instabilities in a large portion of the tests at low mass flow
rates and low subcooling. Flow patterns in presence of flow instabilities are mainly characterized by bubbly/slug flow and
slug/annular flow. Heat transfer rates have been studied in all flow pattern conditions. The two groups of results, with flow
instabilities and without flow instabilities, show similar heat transfer behaviour. The heat transfer characteristics of the
pipes have been studied in comparison with mass flux and vapour quality. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|