| Abstract: | Experiments are carried out to verify a theory developed to correlate the strain history of the polymer during film blowing to the ultimate physical properties of the film. The theory predicts that the amount of strain put into the film once it starts to freeze, defined as strain in the amorphous region and the plastic strain, has a dominant effect on the film properties. Two grades of low and linear low density polyethylene, experimental resins supplied by Mobil chemical company, were used to produce the blown film yielding a 1.25 mil film at the for all experimental runs. Film surface and bulk temperatures, along the machine direction and around the bubble, were measured using the infra-red techniques to identify the points where film starts to crystallize. A video digitization technique was used to measure the bubble kinematics. Film properties were measured using standard ASTM methods. The results indicate a correlation between the amount of strain and a measure of stress with ultimate physical properties of the blown film. This principle leads to the correlation of both the machine and transverse film properties on the same surface. The results obtained can potentially be exploited by designing the blown-film equipment and processing conditions such that optimal bubble stretching produces desired film properties. |
