A Computational Approach to Determine Average Reservoir Pressure in a Coalbed Methane (CBM) Well Flowing Under Dominant Matrix Shrinkage Effect

Desorption of gas from coal matrix alters the pore volume of fracture network. Consequently, cleat porosity and permeability of reservoir changes as pressure depletes. The method of standard pressure analysis calculations produces incorrect results in the case of coalbed methane reservoirs producing under dominant matrix shrinkage effect. The change in cleat porosity and permeability due to shrinkage of coal matrix following gas desorption with pressure depletion invalidates the underlying assumptions made in the derivation of diffusivity equation. Consequently, equations of pseudo-steady state commonly used in conventional reservoirs no longer remain valid as the porosity and permeability values change with pressure depletion. In this paper, effort has been made to describe pseudo-steady-state flow in coalbed methane reservoirs in the form of a new equation that accounts for pressure dependency of cleat porosity and permeability due to shrinkage of coal matrix. The concept of Al-Hussainy et al. (1966) has been extended to define a new pseudo-pressure function which assimilates within itself the pressure dependence of porosity and permeability Palmer and Mansoori (1998). Equation has been used to relate the cleat porosity with pressure. The equation-based computational method suggested in this paper finds its usefulness in estimating average reservoir pressure for any known flowing bottom hole pressure and thus reducing the frequency of future pressure buildup tests. The new equation is also useful in predicting reservoir pressure under the situation when coal matrix shrinks below desorption pressure. The equation used in the computational method has been validated with the help of numerical simulator CMG-GEM.