X~Ku波段宽带驱动放大器设计 |
| |
引用本文: | 周守利,陈瑞涛,周赡成,李如春.X~Ku波段宽带驱动放大器设计[J].强激光与粒子束,2019,31(3):033002-1-033002-5. |
| |
作者姓名: | 周守利 陈瑞涛 周赡成 李如春 |
| |
作者单位: | 浙江工业大学 信息工程学院, 杭州 310023 |
| |
基金项目: | 中国科学院空间科学战略性科技先导专项基金项目XDA04060300中国博士后科学基金项目2013M540147 |
| |
摘 要: | 基于SiC衬底的0.25 μm GaN HEMT工艺,设计了一款X~Ku波段宽带1 W驱动放大器单片微波集成电路。设计使用了一种有源器件的大信号输出阻抗的等效RC模型验证了GaN HEMT工艺模型的准确性,并获得了不同尺寸的GaN HEMT的大信号输出阻抗。第一级管芯采用负反馈结构,降低匹配网络的Q值,通过带通匹配网络拓扑,实现了宽带匹配。测试结果表明,在28 V的工作电压下,8~18 GHz的频率内驱动放大器实现了输出功率大于30 dBm,功率附加效率大于21%,功率增益大于15 dB。芯片尺寸为:2.20 mm×1.45 mm。该芯片电路具有频带宽、效率高、尺寸小的特点,主要用于毫米波收发组件、无线通讯等领域,具有广泛的应用前景。
|
关 键 词: | X~Ku波段 氮化镓 驱动放大器 负反馈 单片微波集成电路 |
收稿时间: | 2018-11-29 |
Design of X~Ku band broadband driver amplifier |
| |
Institution: | College of Information Engineering, Zhejiang University of Technology, Hangzhou 310023, China |
| |
Abstract: | In this paper, an X~Ku band broadband 1 W driver amplifier MMIC based on 0.25 μm GaN HEMT on SiC process is designed. The design uses an equivalent RC model of active devices' large-signal output impedance for verifying the accuracy of the GaN HEMT process model. And large-signal output impedances of GaN HEMT with different dimensions are achieved. Negative feedback structure is applied for the first-stage transistor to reduce the Q value of the matching network. The broadband matching is successfully achieved through band-pass matching network topology. The measurement results show that this driver amplifier at 28 V operation voltage achieved over 30 dBm output power, 21% power added efficiency and 15 dB power gain from 8 GHz to 18 GHz. The chip size is 2.20 mm×1.45 mm. The MMIC chip has the characteristics of wide bandwidth, high efficiency and small size. It can be mainly used in fields such as millimeter-wave transceiver components and wireless communication, and has broad application prospect. |
| |
Keywords: | |
本文献已被 CNKI 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |