Preparation and Application of Ca0.8 Sr0.2 TiO3 for Plasma Activation of CO2

Despite a large interest in plasma-assisted catalytic technology (PACT), very little has been reported about the catalytic effects of different dielectric barriers on a dielectric barrier discharge (DBD) reaction. In the present study, Ca_0.8Sr_0.2TiO₃, that possesses a high permittivity, was prepared by liquid phase sintering and used as a dielectric barrier in a DBD reactor to break CO₂. The mechanical and dielectric properties of Ca_0.8Sr_0.2TiO₃ were greatly enhanced by adding 0.5 wt.% Li₂Si₂O₅. A DBD plasma was successfully generated by using this Ca_0.8Sr_0.2TiO₃ as a dielectric barrier and 18.8% CO₂ conversion was achieved with the residence time of 0.17 s at the frequency of 8 kHz, which was much higher than with those using an alumina or a silica glass barrier. It was found that the plasma power increased with the increasing of the permittivity, and finally very dense and strong microdischarges were initiated to decompose CO₂.