Electron probe and auger electron microprobe characterization of modified Cu-based amorphous alloys.

Changes in morphology and local chemical composition due to various methods of modification of surfaces of Cu-Zr, Cu-Hf, and Cu-Ti amorphous alloys (caused by aging in air/dry corrosion or hydrogen charging) were investigated. These modification/activation procedures transform the original amorphous ribbons of low surface area into efficient and stable catalysts, due to the segregation of a distinct amount of Cu and the development of a large specific surface area of Cu on a ZrO x or HfO x support. It was found that aging in air resulted in the formation of a bilayer of rough copper (containing small Cu particles indispensable for catalysis) on top of a rather smooth oxide underlayer (ZrO x, HfO x ). Careful examination of the cross sections of the modified Cu-based ribbons revealed that, even after prolonged aging in air, only the first few microns of the surface layer was modified. Cu-Ti alloy was stable in air and did not undergo the expected modification. Hydrogenation followed by air exposure resulted in a disintegration of the ribbons into small pieces. Each piece was covered with many small Cu clusters 0.1-0.5 microm in diameter formed on an oxide underlayer. High-energy resolution Auger spectroscopy allowed identification of the underlayers (ZrO2, HfO2, or TiO x ), identification of small Cu clusters, determination of the degree of surface oxidation of them, and mapping of the surface to identify the Cu-covered and "naked" heavy metal.