| HPVC皮带轮的注塑模设计与应用 |
| |
| 引用本文： | 杜伟龙,宋凯杰.HPVC皮带轮的注塑模设计与应用[J].宁波大学学报(理工版),2011,24(3):104-107. |
| |
| 作者姓名： | 杜伟龙 宋凯杰 |
| |
| 作者单位： | 1. 湖州市技师学院机械系,浙江湖州,313216
2. 浙江大学城市学院工程学院,浙江杭州,310015 |
| |
| 摘 要： | 针对HPVC皮带轮制件的结构与材料特点,给出了皮带轮合理的成型工艺及注射成型参数;对注塑模具的结构与工作过程、分型面选择、排气机构、模具成型件、浇注系统、脱模机构等作了详细的设计阐述,提出了该类模具设计的注意要点.
|
| 关 键 词： | 注塑模 HPVC 侧向抽芯 一模两腔 |
Design of the Injection Mould for HPVC Belt Pulley |
| |
| DU Wei-long,SONG Kai-jie.Design of the Injection Mould for HPVC Belt Pulley[J].Journal of Ningbo University(Natural Science and Engineering Edition),2011,24(3):104-107. |
| |
| Authors: | DU Wei-long SONG Kai-jie |
| |
| Institution: | DU Wei-long 1,SONG Kai-jie 2 ( 1.Department of Mechanical Engineering,Huzhou Technician College,Huzhou 313216,China,2.Engineering Branch,Zhejiang University City College,Hangzhou 310015,China ) |
| |
| Abstract: | Based on the structure of a HPVC belt pulley and its technical characteristics, a more applicable forming process and injection molding conditions are introduced. The mold structure and working process are depicted, and the selection of parting surface and the exhaust mechanism are demonstrated. In particular, the molding parts, the gating system and the ejection mechanism are given in more detail fashion. |
| |
| Keywords: | injection mould HPVC side core pulling one die with two cavities |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
