Ceramic Foams from a Preceramic Polymer and Polyurethanes: Preparation and Morphological Investigations |
| |
Authors: | Colombo Paolo Griffoni Martina Modesti Michele |
| |
Affiliation: | (1) Dipartimento di Ingegneria Meccanica—Settore Materiali, Università di Padova, via Marzolo 9, 35131 Padova, Italy;(2) Dipartimento di Processi Chimici dell'Ingegneria, Università di Padova, via Marzolo 9, 35131 Padova, Italy |
| |
Abstract: | Open-cell ceramic foams were obtained from a preceramic polymer (silicone resin) and blown polyurethanes. The preceramic polymer, which is crosslinked by condensation of silanol groups, was dissolved in CH2Cl2 and added to a liquid polyol containing the surfactant and the amine catalyst. Isocyanate was then added to the mixture and the foam was obtained through a twofold blowing mechanism (physical and chemical blowing). The morphology of the expanded polyurethane, which can be flexible or semirigid, characterized the final structure of the ceramic foam. The materials obtained were pyrolyzed in a nitrogen flux at temperatures of 1000–1200°C, thus allowing for the polymer-to-ceramic transformation to occur in the preceramic polymer. The ceramic foams produced in this way consisted of an amorphous silicon oxycarbide ceramic (SiOC). They presented a density ranging from 0.1 to 0.3 g/cm3. The average pore diameter ranged from 200 to 400 m and they possessed 80 to 90% open porosity. |
| |
Keywords: | preceramic polymers foams silicon oxycarbide |
本文献已被 SpringerLink 等数据库收录! |
|