| Abstract: | The automotive industry more and more frequently uses composite materials such as molded compounds (sheet‐molded compounds, SMC, or bulk‐molded compounds, BMC). Bonding is then the only way of assembling two pieces. Consequently, and in order tentatively to predict the adhesive behavior of such materials, it is necessary to have a good knowledge of their surface properties. Here, different complementary techniques of surface analysis allowed us, on the one hand, to reach this aim for BMCs prepared by compression molding and, on the other hand, to show the influence on the surface properties of the concentration and composition of the internal release agent added to the blend. The surface heterogeneity and the organic nature of the surface of the compounds are shown and no phase separation occurs there as in the bulk. Mold release agents remain in the surface layer and induce some acid–base character to the surface material which depends on the type of stearate introduced in the blend. Copyright © 1999 John Wiley & Sons, Ltd. |
