| 烧结实训教学系统的设计与研制 |
| |
| 引用本文： | 罗志国,姜茂发,邹宗树,茹家胜.烧结实训教学系统的设计与研制[J].实验室科学,2014(6):132-134. |
| |
| 作者姓名： | 罗志国 姜茂发 邹宗树 茹家胜 |
| |
| 作者单位： | 东北大学; |
| |
| 基金项目： | 辽宁省普通高等教育本科教学改革研究项目(项目编号:2012-625) |
| |
| 摘 要： | 针对钢铁冶金实训教学要求,设计了符合生产实际的烧结冷态实训装置。控制系统采用一体化控制柜。选用西门子S7-300PLC和紫金桥组态软件实现实训装置控制系统的设计。控制模式包括远程手动控制和就地手动控制两种模式。通过研制与开发烧结预处理仿真模型,可实现教学内容形象化、时空化,拉近课堂与实践的距离。该装置已经投入使用,获得了较好的实训效果。
|
| 关 键 词： | PLC 组态软件 烧结 机电一体化 控制系统 |
Research and design of the sintering training teaching system |
| |
| LUO Zhi-guo,JIANG Mao-fa,ZOU Zong-shu,RU Jia-sheng.Research and design of the sintering training teaching system[J].Laboratory Science,2014(6):132-134. |
| |
| Authors: | LUO Zhi-guo JIANG Mao-fa ZOU Zong-shu RU Jia-sheng |
| |
| Institution: | (Northeastern University, Shenyang 110819, China) |
| |
| Abstract: | In order to meet the needs of practical training of ferrous metallurgy in colleges, we designed the sintering training devices which fits industrial production practical. The integrated control cabinet is adopted in this control system, and the Siemens S7-300 PLC and configuration software are choosing to realize the control system design of training equipment. The control mode includes two kinds of modes, which are remote control and manual control. Through the development and use of sintering training devices, the teaching content can be visualized. This device has been put into use in colleges, and obtained the good training effect. |
| |
| Keywords: | PLC configuration software sintering mechantronics system control system |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
