首页 | 本学科首页   官方微博 | 高级检索  
     检索      

铜掺杂氧化锌薄膜阻变特性的研究
引用本文:杨帆,韦敏,邓宏,杨胜辉,刘冲.铜掺杂氧化锌薄膜阻变特性的研究[J].发光学报,2014,35(5):604-607.
作者姓名:杨帆  韦敏  邓宏  杨胜辉  刘冲
作者单位:电子科技大学 电子薄膜与集成器件国家重点实验室, 四川 成都 610054
基金项目:中央高校基本科研业务费; 中国高等学校博士学科点科研基金(20110185110014)资助项目
摘    要:以 ZnO:Al为底电极,Cu为顶电极,在同种工艺条件下分别制备了类电容结构的纯ZnO 阻变器件和ZnO:2%Cu阻变器件,分析比较了两种器件的典型I-V特性曲线、置位电压(VSet)和复位电压(VReset)的分布范围、器件的耐久性。结果显示,ZnO:Cu阻变器件较纯ZnO阻变器件有更大的开关比和更稳定的循环性能。另外,研究了 ZnO:Cu阻变器件的阻变机理,通过对其I-V特性曲线分析得出以下结论:ZnO:Cu阻变器件在高阻态遵循空间电荷限制电流效应,低阻态符合欧姆定律。

关 键 词:铜掺杂氧化锌  阻变开关  空间电荷限制电流效应
收稿时间:2013/12/23

Characteristics of Copper Doped Zinc Oxide Thin Film Resistive Switching
YANG Fan,WEI Min,DENG Hong,YANG Sheng-hui,LIU Chong.Characteristics of Copper Doped Zinc Oxide Thin Film Resistive Switching[J].Chinese Journal of Luminescence,2014,35(5):604-607.
Authors:YANG Fan  WEI Min  DENG Hong  YANG Sheng-hui  LIU Chong
Institution:State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China, Chengdu 610054, China
Abstract:Pure ZnO resistive switching and ZnO:2% Cu resistive switching with sandwich structure were fabricated in the same conditions. The bottom electrode was ZnO:Al, and the top electrode was Cu for the resistive switchings. The switching characteristics such as endurance, variations of threshold voltage as well as distribution of resistance were investigated. The results demonstrate that the ZnO:Cu devices exhibit more excellent switching performance than ZnO devices. In addition, the switching mechanism of ZnO:Cu resistive device were also studied in this paper. The I-V characteristics of the device indicate that the conduction mechanisms of high and low resistance states can be explained by trap-controlled space charge limited current (SCLC) and Ohmics law, respectively.
Keywords:ZnO∶Cu  resistive switching  SCLC
本文献已被 CNKI 等数据库收录!
点击此处可从《发光学报》浏览原始摘要信息
点击此处可从《发光学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号