Piezoelectric Sensor in Situ Monitoring Adsorption of Fibrinogen and Surfactant onto a Self-Assembled Monolayer of Alkanethiols

This report describes the use of a piezoelectric quartz crystal (PQC) sensor to investigate the nonspecific adsorption of fibrinogen (FN) and sodium dodecyl sulfate (SDS) onto a self-assembled monolayer (SAM) of alkanethiols on gold. The change in adsorption mass was monitored in situ by the PQC sensor. A kinetics model was proposed to describe the adsorption of the FN and SDS on the hydrophobic SAM surface. The adsorption kinetics parameters were determined from the responses of the PQC. The adsorption and desorption rate constants of the FN on the SAM surface were estimated to be (6.18 ± 0.53) × 10³ M⁻¹ s⁻¹ and (6.74 ± 0.72) × 10⁻³ s⁻¹, respectively. The rate constants for the adsorption and desorption of SDS on the SAM are (24.3 ± 1.4 M⁻¹ s⁻¹) and (1.52 ± 0.11) × 10⁻² s⁻¹, respectively. The adsorption of SDS on the SAM was reversible. The fractional coverage of the FN on the SAM surface was estimated from kinetics analyses to be 42–86% for the FN concentration range 25–400 μg/ml. Over 80% of the FN is irreversibly adsorbed on the SAM surface with respect to dilution of the bulk phase. The fraction of FN reversibly adsorbed increases with the bulk concentration of FN.