首页 | 本学科首页   官方微博 | 高级检索  
     检索      

高温超导四工器的设计与仿真
引用本文:杜佳男,葛德永,杨丰兰,胡磊,何明,张旭,季鲁.高温超导四工器的设计与仿真[J].低温与超导,2013(2):1-4.
作者姓名:杜佳男  葛德永  杨丰兰  胡磊  何明  张旭  季鲁
作者单位:南开大学电子系
基金项目:国家自然科学基金项目(61101018;51002081;61171028;61176119);中央高校基本科研业务费专项资金资助项目
摘    要:文中基于单端口群时延设计了一款高温超导四工器。该四工器为四个四阶的滤波器并联,采用半波长开环耦合结构和L型谐振器,最终仿真回波损耗可以达到-24.4dB以下,与理想曲线吻合良好。本设计方法很好的解决了以往多工器占用面积过大、不同信道之间影响严重、仿真时间较长的问题,实现了超导多工器小型化,并缩短了多工器的设计周期。

关 键 词:高温超导  四工器  L型谐振器  单端口群时延

Design and simulation of HTS multiplexers
Du Jianan,Ge Deyong,Yang Fenglan,Hu Lei,He Ming,Zhang Xu,Ji Lu.Design and simulation of HTS multiplexers[J].Cryogenics and Superconductivity,2013(2):1-4.
Authors:Du Jianan  Ge Deyong  Yang Fenglan  Hu Lei  He Ming  Zhang Xu  Ji Lu
Institution:(Department of Electronics,Nankai University,Tianjin 300071,China)
Abstract:A high temperature superconducting(HTS) multiplexer was designed in the paper based on single-port group delay.The multiplexer consisted of four parallel connected four-order filters and was realized by a half wavelength open-loop resonator and L-type resonators.As simulating results,the return loss of all channels was less than-24.4dB,which was in good agreement with the theoretical results.Some most common problems in multiplexers such as occupancy area,channel-related influence and simulation time were well solved using this novel method,which provided the possibility for multiplexers to be in smaller sizes and simulated in shorter time.
Keywords:HTS  Four channel multiplexer  L-type resonator  Single-port group delay
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号