首页 | 本学科首页   官方微博 | 高级检索  
     

压电薄膜变形镜响应函数计算及参数优化
引用本文:王德恩, 胡东霞, 代万俊, 等. 压电薄膜变形镜响应函数计算及参数优化[J]. 强激光与粒子束, 2011, 23(05).
作者姓名:王德恩  胡东霞  代万俊  赵军普  袁强  景峰  李小群
作者单位:1.中国工程物理研究院 激光聚变研究中心, 四川 绵阳 621 900;;;2.中国工程物理研究院 研究生部, 四川 绵阳 621 900;;;3.清华大学 工程物理系, 北京 1 00084
摘    要:针对方口径压电薄膜变形镜,采用傅里叶级数法推导了其机电行为的数学解析式。并利用该表达式对该类变形镜的交联值、使用口径等性能指标进行了研究。结果表明:交联值随电极尺寸呈线性变化关系,在可用范围内保持在0.6以上,压电薄膜变形镜大的交联值保证了其对低阶像差强的校正能力;变形镜的校正能力与通光口径密切相关,其最佳使用口径比约为0.8。

关 键 词:自适应光学   压电薄膜变形镜   响应函数   交联值   使用口径

Response function calculation and parameter optimization of piezoelectric film deformable mirror
wang deen, hu dongxia, dai wanjun, et al. Response function calculation and parameter optimization of piezoelectric film deformable mirror[J]. High Power Laser and Particle Beams, 2011, 23.
Authors:wang deen  hu dongxia  dai wanjun  zhao junpu  yuan qiang  jing feng  li xiaoqun
Affiliation:1. Research Center of Laser Fusion,CAEP,P.O.Box 919-918,Mianyang 621900,China;;;2. Graduate School of China Academy of Engineering Physics,Mianyang 621900,China;;;3. Department of Engineering Physics,Tsinghua University,Beijing 100084,China
Abstract:The response function of square-aperture piezoelectric film deformable mirror is calculated using Fourier series method. Then the optimization of some parameters such as correlation coefficient and beam aperture is done by numerical simulation. The results show that, correlation coefficient is linear with the side-length of electrode and remains above 0.6 for beam aperture of 100 mm×100 mm with 4 to 14 electrodes of 5 to 25 mm side-length in each row, ensuring the mirror’s strong ability to correcting low-order aberrations. Beam aperture ratio is also an important parameter affecting the mirror’s aberration correction ability, and its optimal value is simulated to be 0.8 in our conditions.
Keywords:adaptive optics  piezoelectric film deformable mirror  response function  correlation coefficient  beam aperture
点击此处可从《强激光与粒子束》浏览原始摘要信息
点击此处可从《强激光与粒子束》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号