Utilisation d'electrolyte solide polymere dans les piles a combustibles alcalines |
| |
| Institution: | 1. State Key Laboratory of Petroleum Pollution Control, Beijing 102206, PR China;2. State Key Laboratory of Heavy Oil Processing, China University of Petroleum, Qingdao 266580, China;3. Shandong NHU Vitamin Co., Ltd., Weifang 262737, China;4. State Key Laboratory of Safety and Control for Chemicals, SINOPEC Research Institute of Safety Engineering, Qingdao 266071, China;1. Department of Chemistry, Faculty of Science, Minya University, Minya, Egypt;2. Department of Chemistry, Florida Institute of Technology, Melbourne, FL, USA |
| |
| Abstract: | The use of a solid polymer electrolyte in alkaline fuel cells. The objective of this research was to develop a new type of cheap anion exchange membranes for use in alkaline fuel cells. The polyelectrolyte anion exchange membrane was prepared by grafting quaternary amines (DABCO, TEA) on the epichlorhydrine polymer, consolidated by reticulation. Obtained ionic conductivities are over 10?2 S.cm?1, with a concentration of positive ionic sites of a few milli-equivalents per gram of material. Measured anionic transport numbers are greater than 0.90. Membranes, which can absorb 30 to 50% of water, are quasi impervious to gases such as H2 and 02 and can operate at temperatures up to 120°C. Alkaline fuel cells assembled with both types of membranes showed good performances. Particular attention was devoted to the membrane-electrode interface. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
