首页 | 本学科首页   官方微博 | 高级检索  
     

ADS堆功率控制研究及其在DCS系统的实施
引用本文:尹凯,马雯静,崔文娟,党世武,黎鑫鑫,贺智勇,段利敏,侯忆铠. ADS堆功率控制研究及其在DCS系统的实施[J]. 原子核物理评论, 2022, 39(1): 121-126. DOI: 10.11804/NuclPhysRev.39.2021064
作者姓名:尹凯  马雯静  崔文娟  党世武  黎鑫鑫  贺智勇  段利敏  侯忆铠
作者单位:1.中国科学院近代物理研究所,兰州 730000
摘    要:研究了基于加速器束流强度调节来控制中国加速器驱动嬗变研究装置(CiADS)次临界堆功率的方法.束流强度的调节是通过比较堆功率的测量值和设定值,由PID(比例-积分-微分)控制器自动控制可调光阑的孔径大小完成的.为了评估所提出的自动控制方法,基于点堆动力学方程建立了CiADS次临界堆堆芯模型.基于CiADS堆芯模型的仿真...

关 键 词:加速器驱动次临界系统  功率控制  束流强度  分布式控制系统
收稿时间:2021-09-06

Study of Power Control for ADS System and Its Implementation in DCS Control System
Kai YIN,Wenjing MA,Wenjuan CUI,Shiwu DANG,Xinxin LI,Zhiyong HE,Limin DUAN,Yikai HOU. Study of Power Control for ADS System and Its Implementation in DCS Control System[J]. Nuclear Physics Review, 2022, 39(1): 121-126. DOI: 10.11804/NuclPhysRev.39.2021064
Authors:Kai YIN  Wenjing MA  Wenjuan CUI  Shiwu DANG  Xinxin LI  Zhiyong HE  Limin DUAN  Yikai HOU
Affiliation:1.Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000, China2.School of Nuclear Science and Technology, University of Chinese Academy of Sciences, Beijing 100049, China3.School of Nuclear Science and Technology, Lanzhou University, Lanzhou 730000, China
Abstract:The control method for the reactor power by adjusting the beam intensity has been studied for the China initiative Accelerator Driven System(CiADS) facility. In the proposed control method, the beam intensity can be adjusted continuously by changing the aperture size. The aperture size is adjusted automatically based on the PID controllers by comparing the setting power with the measured value. To evaluate the proposed method, a CiADS core model is built based on the point reactor kinetics equation. The simulations based on the CiADS core model have indicated that the reactor power varies with the beam intensity and that the reactor power can be controlled effectively by adjusting the aperture size. Finally, the automatic and manual control functions for the reactor power have been implemented in a Distributed Control System(DCS). In the automatic control function, the measured value of the reactor power is sent to the input-output model of DCS system and is compared with the setting value. Then, the new value of the aperture size is calculated with the PID controller and is sent the drive motor system of the aperture. In addition, the reactor power can also be adjusted by setting manually the aperture size in the control room.
Keywords:
点击此处可从《原子核物理评论》浏览原始摘要信息
点击此处可从《原子核物理评论》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号