首页 | 本学科首页   官方微博 | 高级检索  
     检索      

基于狭缝波导的聚合物基微环折射率传感器研究
引用本文:吕桓林,梁宇鑫,韩秀友,谷一英,武震林,赵明山.基于狭缝波导的聚合物基微环折射率传感器研究[J].红外与激光工程,2020,49(1):0118001-0118001(6).
作者姓名:吕桓林  梁宇鑫  韩秀友  谷一英  武震林  赵明山
作者单位:1. 大连理工大学 光电工程与仪器科学学院, 辽宁 大连 116024;
基金项目:科技部国际科技合作专项项目(2014DFG32590);国家自然科学基金(61875028,61704017);“十三五”装备预研领域基金重点项目(61404130403);大连市科技创新基金项目(2018J11CY006)
摘    要:基于狭缝波导结构,设计了工作波长在890 nm的聚合物基微环。从折射率传感的角度详细分析了狭缝波导的模场特性。分析了波导高度、宽度及狭缝宽度对灵敏度的影响。传统的狭缝波导具有较高的弯曲损耗,这会影响微环谐振器的品质因子Q以及消光比。设计了非对称的狭缝结构,保证波导模式位于波导中央传输,降低弯曲损耗。为了条形波导与狭缝波导更好的耦合,设计了基于多模干涉结构的条形-狭缝波导模式转换器。仿真表明设计的微环谐振器的传感灵敏度达到109 nm/RIU。

关 键 词:集成光学    狭缝波导    聚合物微环    光学传感
收稿时间:2019-08-05

Study on refractive index sensor of polymeric-based microring based on slot waveguide
Institution:1. School of Optoelectronic Engineering and Instrumentation Science, Dalian University of Technology, Dalian 116024, China;2. Department of General Education, Dalian Polytechnic University, Dalian 116034, China
Abstract:Based on slot waveguide structures, a polymer-based microring operating at around 890 nm wavelength was proposed and designed. A detailed analysis of modal characteristics of the slot waveguides were carried out from refractive index sensing. The relationships between the sensitivity and the waveguide height, width and slot width were analyzed. Conventional bend slot waveguide had a large propagation loss, which had a bad influence on the quality factor Q and the extinction ration of the microring. An asymmetric slot waveguide was designed which could make the mode propagate in the middle of the waveguide and then decrease the bending loss. A strip-slot mode converter based on multimode interference (MMI) structure was designed for better coupling between strip and slot waveguides. Simulations show that the sensitivity of the designed microring resonator could reach 109 nm/RIU.
Keywords:
点击此处可从《红外与激光工程》浏览原始摘要信息
点击此处可从《红外与激光工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号