用于10 kW级高光束质量激光输出的国产部分掺杂光纤北大核心CSCD |
| |
引用本文: | 黄良金,吴函烁,李瑞显,肖虎,杨欢,闫志平,冷进勇,潘志勇,周朴.用于10 kW级高光束质量激光输出的国产部分掺杂光纤北大核心CSCD[J].强激光与粒子束,2022,34(11):111002-1-111002-3. |
| |
作者姓名: | 黄良金 吴函烁 李瑞显 肖虎 杨欢 闫志平 冷进勇 潘志勇 周朴 |
| |
作者单位: | 国防科技大学 前沿交叉学科学院,长沙 410073 |
| |
基金项目: | 国家自然科学基金项目(62035015, 61805280);湖南省创新研究群体项目(2019JJ1005) |
| |
摘 要: | 当前光纤激光功率提升受限于模式不稳定效应及非线性效应,为了克服上述功率提升限制因素,自主设计并研制了大模场部分掺杂光纤。最终,采用自研部分掺杂光纤及后向级联泵浦方案,成功实现了10.1 kW的光纤激光输出,对应的光束质量因子(M2)为2.16。
|
关 键 词: | 高功率 光纤激光 部分掺杂光纤 高光束质量 |
收稿时间: | 2022-07-23 |
Homemade confined-doped fiber for 10 kW level fiber laser output with good beam quality |
| |
Institution: | College of Advanced Interdisciplinary Studies, National University of Defense Technology, Changsha 410073, China |
| |
Abstract: | Power scaling of high-brightness fiber laser is limited by the mode instability and nonlinear effects. To overcome these limiting factors, a large mode area confined-doped fiber is designed and fabricated. By utilizing the homemade confined-doped fiber and backward tandem pumping scheme, fiber laser with output power of 10.1 kW is successfully achieved, where the corresponding beam quality factor (M2 ) is 2.16. |
| |
Keywords: | |
本文献已被 维普 等数据库收录! |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|