首页 | 本学科首页   官方微博 | 高级检索  
     检索      

缺口膨胀环实验的设计分析与数值模拟
引用本文:汤铁钢,李庆忠,刘仓理.缺口膨胀环实验的设计分析与数值模拟[J].爆炸与冲击,2009,29(6):561-565.
作者姓名:汤铁钢  李庆忠  刘仓理
作者单位:中国工程物理研究院流体物理研究所冲击波物理与爆轰物理国防科技重点实验室,四川,绵阳,621900;中国工程物理研究院流体物理研究所冲击波物理与爆轰物理国防科技重点实验室,四川,绵阳,621900;中国工程物理研究院流体物理研究所冲击波物理与爆轰物理国防科技重点实验室,四川,绵阳,621900
基金项目:国家自然科学基金项目,冲击波物理与爆轰物理国防科技重点实验室基金项目 
摘    要:提出并设计了用于研究材料在冲击拉伸加载下损伤演化过程的缺口膨胀环实验。通过数值模拟研究了缺口膨胀环的拉伸加载历程。研究表明,缺口膨胀环各位置经历拉伸加载时间的长度由其与缺口之间的距离决定,但加载时间长度不能简单按Mott卸载波的传播时间来估计,需要借助膨胀环各位置的速度历史来确定。

关 键 词:固体力学  冲击拉伸  缺口膨胀环  卸载波

Design analysis of expanding gap-ring test for studying evolvement of damage
TANG Tie-gang,LI Qing-zhong,LIU Cang-li.Design analysis of expanding gap-ring test for studying evolvement of damage[J].Explosion and Shock Waves,2009,29(6):561-565.
Authors:TANG Tie-gang  LI Qing-zhong  LIU Cang-li
Institution:1.National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, China Academy of Engineering Physics, Mianyang 621900, Sichuan, China
Abstract:The expanding gap-ring test was put forward and designed for studying the evolvement of damage in material under impact tensile.The impact tensile process of an expanding gap ring was studied by numerical simulation.The length of loading time for different positions in the gap ring is relative to the distances of these positions from the gap.However,the length of time can't be calculated by Mott-wave transmitting,but can be determined by the velocity histories of nodes in different positions of the gap ring...
Keywords:solid mechanics  impact tensile  expanding gap-ring  relieve wave
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《爆炸与冲击》浏览原始摘要信息
点击此处可从《爆炸与冲击》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号