Preparation and characterization of a new PEO-PPG blend polymer electrolyte system

This paper reports on preparation and characterization of thin films of a new zinc ion conducting blended polymer electrolyte system containing polyethylene oxide PEO] and polypropylene glycol PPG] complexed with zinc triflate Zn(CF₃SO₃)₂] salt. The room temperature ionic conductivity (σ _298K) data of such PEO-PPG polymer blends prepared by solution casting technique were found to be of the order of 10^?5 S cm^?1, whereas the optimized composition containing 90:10 wt% ratio of PEO and PPG possessed an appreciably high ionic conductivity of 7.5?×?10^?5 S cm^?1. Subsequently, six different weight percentages of zinc triflate viz., 2.5, 5, 7.5, 10, 12.5 and 15, respectively, were added into the above polymer blend and resulting polymer-salt complexes were characterized by means of various analytical tools. Interestingly, the best conducting specimen namely 87.5 wt% (PEO:PPG)-12.5 wt% Zn(CF₃SO₃)₂ exhibited an enhanced room temperature ionic conductivity of 6.9?×?10^?4 S cm^?1 with an activation energy of 0.6 eV for ionic conduction. The present XRD results have indicated the occurrence of characteristic PEO peaks and effects of salt concentration on the observed intensity of these diffraction peaks. Appropriate values of degree of crystallinity for different samples were derived from both XRD and DSC analyses, while an examination of surface morphology of the blended polymer electrolyte system has revealed the formation of homogenous spherulites involving a rough surface and relevant zinc ionic transport number was found to be 0.59 at room temperature for the best conducting polymer electrolyte system thus developed.