Effect of Spherical Nanoparticles on the Motion of Macromolecular Chains and Segments of Isotactic Polypropylene. I. Dynamic Mechanical and Thermal Properties

The role of spherical nano-CaCO₃ particles treated with 2 wt% and 6 wt% stearic acid (SA), respectively, on the motion of macromolecular chains and segments of isotactic polypropylene (iPP) was studied through the dynamic mechanical analysis and nonisothermal crystallization. Higher nucleation activity of the particles and more nucleating sites were achieved in the 6 wt% SA treated particle nanocomposites with respect to the 2 wt% SA counterpart. The increased nucleation efficiency caused high inhomogeneity and thus large mobility of the amorphous phase of iPP, which favored a low glass transition temperature (T_g ) in the nanocomposites. However, the spherical nanoparicles also spatially restrained the motion of macromolecular chains and segments, and the better the nanoparticles dispersed, the stronger the restriction was. Thus the glass transition temperature (T_g ) of the nanocomposites decreased with increasing filler loading but recovered at a certain particle concentration. At this filler content, the maximal α-transition temperature (T_α ) and the main melting peak temperature (T_m1 ) as well as the lowest degree of crystallinity (X_PP ) also occurred. This critical filler loading appeared at lower value (20 wt%) in 6 wt% SA treated nano-CaCO₃ composites with respect to 2 wt% SA counterpart (25%) due to the better dispersion of particles in the former. It was concluded that the mobility of the macromolecular chains and segments of iPP was dominated by the competition of the spatial confinement and nucleation effect of nano-CaCO₃ particles in the matrix.