Simple instrument for titrimetry without visual indicators. gasometric titrations: Cerimetry,chlorometry, nitrate,nitrite, hydroxide and carbonate determination

It was shown in previous papers, that many titrimetric problems can be solved by observing the pressure change of a closed system above the solution titrated at the equivalence point. This principle was made the basis of a gasometric titration method in which the end-point is found graphically. The titrant is added to the sample solution in measured increments at fixed intervals of time and the corresponding gas pressure or volume of the system is recorded and then plotted against the volume of added titrant. Half a dozen readings are sufficient to establish the end-point of a titration, which is found at the intersection of two straight lines. This graphical method was applied to cerimetry and chlorometry, as well as to some other analytical reactions (determination of nitrite, nitrate, hydroxide and carbonate) already described in previous papers on the gas pressure end-point technique. The results are comparable in precision and accuracy to the values obtained by the conventional visual end-point titrations. A gasometric titration takes about 10 minutes. The presence of other substances in the sample capable of reacting with the titrant does not necessarily cause interference.