Colorimetric determination of niobium in titanium alloys

There is need for a method for the determination of niobium in titanium alloys, since niobium-titanium alloys are becoming increasingly important. The determination of niobium in this type of alloy is an extremely difficult matter. Many approaches were tried before the problem was solved. In the method proposed in this paper the sample is dissolved in a mixture of hydrofluoric and nitric acids, the solution evaporated to a small volume, and boric acid added. Two tannic acid separations are then made to separate the niobium from the bulk of the titanium. The niobium, is determined colorimetrically by the thiocyanate method using a water-acetone medium. A study was made of the possible interference of elements that might be present in titanium alloys. It was found that the presence of tantalum causes two opposing tendencies. Tantalum can cause high results for niobium because it forms a complex with thiocyanate which is visually colorless but shows some absorption. Tantalum can cause low results for niobium by hindering the development of the niobium color. The resultant effect of the tantalum depends upon the amount of tantalum present, the amount of niobium present and the ratio of tantalum to niobium. The presence of more than one per cent. tungsten can lead to high results for niobium. Other elements that might be present in titanium alloys do not interfere with the method. The procedure is designed for titanium alloys containing 0.05 to 10 per cent. niobium. The method is reasonably rapid. Six determinations can be finished in two days. The method should be applicable to many other materials besides titanium alloys.