Colorless polyimide nanocomposite films containing hexafluoroisopropylidene group

Poly(amic acid) (PAA) was prepared by the reaction of 4,4'‐(hexafluoro‐isopropylidene)diphthalic anhydride (6FDA) with 2,2'‐bis4‐(4‐aminophenoxy)phenyl] hexafluoropropane (BAPP) in N,N‐dimethylacetamide (DMAc). Hybrid films were obtained from blend solutions of the precursor polymer and the organoclay Cloisite 15A, varying the organoclay content from 0 to 3.0 wt%. The cast PAA film was heat‐treated at different temperatures to create polyimide (PI) hybrid films, which showed excellent optical transparencies and were almost colorless. The intercalation of PI chains in the organoclays was examined by means of wide‐angle X‐ray diffraction (XRD) and electron microscopy (SEM and TEM). In addition, the thermo‐mechanical properties were tested using a differential scanning calorimeter (DSC), a thermogravimetric analyzer (TGA), and a universal tensile machine (UTM). In the XRD, SEM, and TEM results for the PI hybrid films, a substantial increase in the agglomeration of the clay particles was observed as the clay loading was increased from 0.5 to 3.0 wt%. This suggests that in the hybrid materials with low clay content, the clay particles are better dispersed in the matrix polymer and do not agglomerate significantly. We found that the addition of a small amount of organoclay is sufficient to improve the thermal and mechanical properties of the PI, with the maximum enhancement being observed at 1.0 wt% Cloisite 15A. Copyright © 2009 John Wiley & Sons, Ltd.