Mechanical investigation of bilayer vascular grafts electrospun from aliphatic polyesters |
| |
Authors: | Ipek Yalcin Enis Jana Horakova Telem Gok Sadikoglu Ondrej Novak David Lukas |
| |
Institution: | 1. Textile Engineering Department, Istanbul Technical University, Istanbul, Turkey;2. Department of Nonwovens and Nanofibrous Materials, Technical University of Liberec, Liberec, Czech Republic |
| |
Abstract: | Electrospun biodegradable vascular grafts provide a wide range of design components from the selection of materials to the modification of fiber structure. In this study, both single layer and bilayer tubular scaffolds with inner diameter of 6 mm were electrospun from polycaprolactone with different molecular weights and poly(l ‐lactide) caprolactone polymers. Bilayer scaffolds were designed by using different combinations of the polymer types in each layer and obtaining fiber orientation in outer layers. Scaffolds were analyzed morphologically and mechanically. Obtained results of mechanical performance were discussed according to the used polymer‐type composition, fiber orientation, and composite effect of both layer in the final graft. Smooth muscle cells were seeded on the scaffolds to test biocompatibility of presented scaffolds. Results indicate that the use of different biodegradable polymers in different combinations in each layer causes notable differences in fiber morphology and mechanical performance of the scaffolds. Moreover, fiber orientation in outer layer improves tensile strength and burst pressures in radial directions while creating a suitable fibrous layer for smooth muscle cells by mimicking the extracellular matrix of tunica media in native vessels. Copyright © 2016 John Wiley & Sons, Ltd. |
| |
Keywords: | vascular graft biodegradable polymers electrospinning fiber orientation burst pressure |
|
|