| 3 mm圆锥喇叭聚焦天线的理论与仿真 |
| |
| 引用本文： | 唐剑明,赵青,郑灵,刘述章,罗先刚.3 mm圆锥喇叭聚焦天线的理论与仿真[J].强激光与粒子束,2012,24(2):436-440. |
| |
| 作者姓名： | 唐剑明 赵青 郑灵 刘述章 罗先刚 |
| |
| 作者单位： | 1.电子科技大学 物理电子学院, 成都 61 0054; |
| |
| 基金项目： | 国际合作项目（OS20122R0151）；国家973项目;四川科技支撑计划基金项目(2010G20157);微细加工光学国家重点实验室基金(M160104012011E11) |
| |
| 摘 要： | 介绍了基于传统光路法的聚焦透镜的设计方法。利用电磁仿真软件计算了透镜置于圆锥喇叭口的3 mm聚焦透镜天线的性能。根据圆锥喇叭最大方向系数及现有文献公式确定喇叭张角，仿真得到天线聚焦性能不够理想。然后仿真了张角12,20,30三种天线聚焦性能，其焦距随张角增大而增大，逐渐接近所设计焦距。从而验证了光路法需电磁波长相对喇叭口径足够小的结论。给出了喇叭张角12,20,30三种天线焦平面上电场分布。喇叭张角30天线焦斑小于2倍波长。
|
| 关 键 词： | 圆锥喇叭 光路法 聚焦透镜 焦距 焦斑 |
| 收稿时间： | 2011/6/27 |
Theory and simulation of 3 mm conical horn focusing lens antennas |
| |
| Tang Jianming
,
Zhao Qing
,
Zheng Ling
,
Liu Shuzhang
,
Luo Xiangang.Theory and simulation of 3 mm conical horn focusing lens antennas[J].High Power Laser and Particle Beams,2012,24(2):436-440. |
| |
| Authors: | Tang Jianming Zhao Qing Zheng Ling Liu Shuzhang Luo Xiangang |
| |
| Institution: | 1.School of Physical Electronics,University of Electronic Science and Technology of China,Chengdu 610054,China;2.Institute of Optics and Electronics,Chinese Academy of Sciences,Chengdu 610209,China |
| |
| Abstract: | The design of focusing lens based on traditional ray path method is introduced.The performances of 3 mm focusing lens antennas are simulated by using electromagnetic simulation software.Antennas with different spread angles (12°,20°,30°) of horn are simulated. It’s concluded that the actual focal length increases and approaches to the value designed gradually when the spread angle of horn increases, and the ray path method can be applied when the electromagnetic wavelength is short enough compared with the horn aperture. The E-field on the focal planes of the three antennas is presented and the focal spot of the antenna with 30° spread angle is smaller than twice the electromagnetic wavelength. |
| |
| Keywords: | conical horn ray path method focusing lens focal length focal spot |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《强激光与粒子束》浏览原始摘要信息 |
| 点击此处可从《强激光与粒子束》下载免费的PDF全文 |
|
