k 0-RNAA used in determination of 129I in a mixed resin sample

A k ₀-RNAA procedure was developed to determine ¹²⁹I in a mixed resin sample. CH₄ extraction and (NH₄)₂SO₃ back-extraction were used to separate ¹²⁹I in ashed samples. The ¹²⁹I target sample for irradiation in the reactor was prepared by heating the (NH₄)₂SO₃ back-extraction solution to reduce its volume and then to dry it in a quartz ampoule. No MgO and LiOH were needed during the target sample preparation. After irradiation, the nuclide ¹³⁰I was purified by combining hydrated antimony pentoxide column and CH₄ extraction separations. A k-factor was determined for the reaction of ¹²⁷I (n, 2n) ¹²⁶I and used for iodine chemical yield determination. The apparent ¹²⁹I concentrations of five nuclear reaction interferences were calculated. The relative standard deviation of three ¹²⁹I determinations was found to be 3.5 %. The ¹²⁹I content in the analyzed resin was found to be 1.36 × 10^?9 g/g (8.63 × 10^?3 Bq/g) with a relative uncertainty of 9.1 %. The detection limit of ¹²⁹I was calculated to be 7.4 × 10^?13 g (4.7 × 10^?6 Bq) in a k ₀-RNAA of a blank sample.