Pulsed laser deposition of polymers doped with fluorescent molecular sensors

Pulsed laser deposition (PLD) has been used to obtain thin films of poly(methyl-methacrylate), PMMA, and polystyrene, PS, doped with fluorescent probes based in the amino aromatic compounds S6, DMA-2,4, Dans and Acrid-acryl. These compounds, both in solution and inserted in polymeric films, show solvatochromic emission band shifts upon changes of pH, polarity and viscosity in their micro-environment and, prepared in thin films, could prove advantageous for use as sensors of the presence of contaminating environmental agents. Deposits, obtained by irradiating targets consisting in films of doped PMMA and PS with a Ti:sapphire laser (800 nm, 120 fs pulse), were analyzed by optical and environmental scanning electron microscopy, fluorescence microscopy, laser-induced fluorescence, micro-Raman spectroscopy and flow injection analysis-mass spectrometry. Results show the effective transfer of the polymer and the probe to the substrate and the high dependence on film structure on the polymer used in the targets. Irradiation with a KrF laser (248 nm, 20 ns) of Dans-doped targets only produced deposits when using PMMA for target preparation. Results are discussed in terms of the participation of multiphoton processes in the fs IR irradiation, the influence of the linear absorption coefficient of the targets and of the different contributions of thermal and chemical effects in the IR femtosecond and UV nanosecond domains. PACS 81.15.Fg; 61.82.Pv