Measurement of in-duct acoustic properties by using a single microphone with fixed position |
| |
Authors: | Choy Y S Huang Lixi |
| |
Affiliation: | Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hunghom, Kowloon, Hong Kong. |
| |
Abstract: | Acoustic properties of sound absorption materials and other acoustic structures can be measured in an impedance tube using the well-established two-microphone method to resolve the two traveling wave components of a standing wave pattern. The accuracy of such measurements depends crucially on the calibration of the two microphones placed in close proximity. To eliminate such calibration, the one-microphone method [Chu, J. Acoust. Soc. Am. 80, 555-560 (1986)] uses the same microphone to probe at two positions sequentially using the voltage driving the loudspeaker as a reference signal. A variant of this method is introduced in this study in which the microphone is fixed at one position while a rigid end plate moves between two positions to resolve the standing wave. The sound source is installed as a side branch, and its driving signal is also used as a reference in the two-step measurement. Close agreement is found with the established two-microphone method, and factors which might affect the accuracy of the new technique are discussed. As a demonstration of the robustness of the method, a low-budget electret microphone is used and the result also matches well with those obtained by the two-microphone method with high-quality condenser type microphones. |
| |
Keywords: | |
本文献已被 PubMed 等数据库收录! |
|