Prediction of track forces in skid-steering of military tracked vehicles

Track forces for outer and inner tracks have been calculated for a military tracked vehicle in a skid-steer situation. The present work is an attempt to improve the understanding of track force variation with turning radius. Furthermore, a reasonable estimate of transmission loads is required for the design of steering transmission for turning a tracked vehicle. This may also be obtained from the track forces. The understanding of track force variation with turning radius has been rather poor. In literature, the reason for lower track force at larger turning radius has been explained in terms of the deflection of the various suspension components like the track shoes, bushings, etc., which are associated with steer action. Deflection of the suspension components does not seem to be an adequate explanation for the variation of track forces with turning radius. In the present work, track forces have been obtained from the dynamics of the moving vehicle. The variation of tractive coefficient (coefficient of friction) due to lateral track slippage has also been considered. This is where the present work differs from the conventional track force estimation where a constant value of coefficient of lateral friction has been used. The estimation of tractive coefficient is made by using pull-slip equation found in literature. The explanation of decreasing track force with increasing radius is given in terms of variation of slip with speed and turning radius. It is found from the study that the concept of variation of coefficient of friction (tractive coefficient) is very important and probably a realistic one in the prediction of track forces. The results of the calculations compare reasonably well with the trends of test result plots obtained in the literature.