| 基于单片机的注塑机节能控制技术研究 |
| |
| 引用本文： | 任继国,王钢明,俞国强,任睿,李国平.基于单片机的注塑机节能控制技术研究[J].宁波大学学报(理工版),2009,22(4):588-592. |
| |
| 作者姓名： | 任继国 王钢明 俞国强 任睿 李国平 |
| |
| 作者单位： | 宁波大学,机械工程与力学学院,浙江,宁波,315211 |
| |
| 基金项目： | 浙江省自然科学基金，宁波大学科研基金 |
| |
| 摘 要： | 通过对注塑机油泵电机的负载状况及能耗分析,结合注塑机的特点确定节能控制方案以及系统软硬件的设计过程,并采用单片机为控制芯片,对压力、流量以及时间等注塑过程中的油泵电机能耗主要因素进行测控,提高油泵电机的运行效率,实现在不同注塑阶段的节能控制.
|
| 关 键 词： | 注塑机 节能控制 单片机 变频器 |
Energy-saving Control Techniques for Injection Molding Machine Based on Single Chip Microcomputer |
| |
| REN Ji-guo,WANG Gang-ming,YU Guo-qiang,REN Rui,LI Guo-ping.Energy-saving Control Techniques for Injection Molding Machine Based on Single Chip Microcomputer[J].Journal of Ningbo University(Natural Science and Engineering Edition),2009,22(4):588-592. |
| |
| Authors: | REN Ji-guo WANG Gang-ming YU Guo-qiang REN Rui LI Guo-ping |
| |
| Institution: | ( Faculty of Mechanical Engineering and Mechanics, Ningbo University, Ningbo 315211, China ) |
| |
| Abstract: | Through analyzing the load conditions and energy dissipation of oil pump motor of the injection molding machine,and considering the characteristics of the injection molding machine to determine the planning of energy-saving control,as well as the designing process of hardware and software system,this paper renders the technical notes for improving the oil pump motor efficiency varying with different injection phases,and implementing energy-saving schemes for the machine.The proposed schemes are implemented with single-chip as the control chip which gauges the pressure,flow rate,timing and other key relevant factors of the oil motor machine in the process of injection. |
| |
| Keywords: | injection molding machine single chip microcomputer energy-saving control converter |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
