|
|||||
|
|
| 大功率、宽光谱超辐射发光管的温度稳定性研究 | |
| 引用本文： | 伊小素,肖文,魏铁钧.大功率、宽光谱超辐射发光管的温度稳定性研究[J].光子学报,2004,33(11):1367-1369. |
| 作者姓名： | 伊小素 肖文 魏铁钧 |
| 作者单位： | 北京航空航天大学,第5研究室,北京,100083;北京世维通光通信技术有限公司SOHO现代城,B1707,北京,100023 |
| 摘 要： | 超辐射发光管（SLD）的温度稳定性是通过芯片制作、耦合封装和应用控制三个环节实现控制. 在一定的驱动电流下,通过提高耦合效率、改善温控器件的几何参数以及器件整体的热分布参数,实现SLD大功率、宽光谱的光功率输出,出纤光功率达到750μW／100mA,光谱宽度大于40nm. 工作温度范围为－40～＋70℃,功率波动小于2 ％. |
| 关 键 词： | SLD 光源 光纤陀螺 |
| 收稿时间： | 2003-10-13 |
| 修稿时间： | 2003年10月13 |
Research on the Thermal Stability of High Power and Broader Spectral Width Super Luminescent Diode |
|
.Research on the Thermal Stability of High Power and Broader Spectral Width Super Luminescent Diode[J].Acta Photonica Sinica,2004,33(11):1367-1369. |
|
| Authors: | |
| Institution: | (1 The 5th Research Institute, Beihang University,Beijing 100083) (2 Beijing SWT Communication Technology Co.Ltd., SOHO Town B1707, Beijing 100023) |
| Abstract: | The temperature stability of the Superluminescent Diode （SLD） is controlled during three stages: fabricating the chip, fiber coupling and application. Through increasing the coupling ratio, modifying the temperature-sensor geometrical parameters and optimizing thermometric parameters of the inner device, the high output power and wide spectrum of SLD are achieved. The data concerning output power is 750 μW／100 mA and the BFWT is better than 40 nm . The working temperature range is from －40 to ＋70℃ with the output power variance less than 2%. |
| Keywords: | SLD Light source Fiber optic gyros |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |
| 点击此处可从《光子学报》浏览原始摘要信息 | |
| 点击此处可从《光子学报》下载免费的PDF全文 | |