Processes and properties of electric arc stabilized by water vortex |
| |
Authors: | Hrabovsky M. Konrad M. Kopecky V. Sember V. |
| |
Affiliation: | Inst. of Plasma Phys., Czechoslovak Acad. of Sci., Prague; |
| |
Abstract: | Experimental investigation of an electric arc stabilized by a water vortex was carried out in a DC arc plasma torch for the power range 90-200 kW. Volt-ampere characteristics of the arc as well as the power balance were determined separately for the part of the arc column stabilized by water and for the remaining part between the nozzle exit and the external anode. The temperature of arc plasma close to the nozzle exit was determined by emission spectroscopy. Negatively biased electric probes in the ion collecting regime were used for determination of the plasma flow velocity. The measured temperatures up to 27000 K, and velocities up to 7 km/s are higher than the values commonly reported for plasma torches with DC arcs stabilized by a gas flow. Mass and energy balances within the arc chamber were determined from the experimental results. The radial transport of the energy by radiation was identified as a decisive process controlling the arc and plasma properties. The balance of radial energy transport was studied. The ratio of energy spent for evaporation of the water to the energy absorbed in the evaporated mass is very low in the water stabilized arc. This is the principal cause of high plasma temperatures and velocities found by the measurements |
| |
Keywords: | |
|
|