首页 | 本学科首页   官方微博 | 高级检索  
     

一种基于导模共振的电光调制器研究
引用本文:袁文,聂义友,桑明煌,刘国栋. 一种基于导模共振的电光调制器研究[J]. 应用光学, 2008, 29(4): 522-525
作者姓名:袁文  聂义友  桑明煌  刘国栋
作者单位:江西师范大学,物理与通信电子学院,江西,南昌,330022;江西省光电子与通信重点实验室,江西,南昌,330022
基金项目:江西省2005年火炬及示点工程项目 , 江西省光电子与通信重点实验室开放基金资助项目
摘    要:实验研究了基于导模共振的反射型电光调制器采用的棱镜耦合方式,在棱镜上面镀有4层膜,依次为银膜下电极-极化聚合物-缓冲层-金膜上电极。对这种衰减全反射(ATR)型的聚合物波导电光调制器进行了视频调制实验,采用静态偏置电压稳定模式同步角方法,结合对入射激光束进行监测,解决了视频调制中激光器噪声对模拟信号调制影响的问题,提高了工作稳定性。实验结果表明:该电光调制器具有良好的线性和较高的灵敏度。

关 键 词:导模共振  极化聚合物  电光调制
收稿时间:2008-03-10

Investigation of electro-optic modulator based on guide mode resonance
YUAN Wen,NIE Yi-you,SANG Ming-huang,LIU Guo-dong. Investigation of electro-optic modulator based on guide mode resonance[J]. Journal of Applied Optics, 2008, 29(4): 522-525
Authors:YUAN Wen  NIE Yi-you  SANG Ming-huang  LIU Guo-dong
Affiliation:1.Institute of Physics and Communication & Electronics, Jiangxi Normal University, Nanchang 330022, China; 2. Key Laboratory of Optoelectronic & Telecommunication of Jiangxi Province, Nanchang 330022, China
Abstract:A guide-mode resonance based electro-optic modulator, which consists of a coupling prism with 4 layers of film coated, was developed. These 4 layers are metal layer, poled polymer, buffer polymer, bottom electrode. The polymer waveguide electro-optic modulator capable of attenuating total reflection was tested in the transmission of the video. A new method was proposed to stabilize mode angle with the static bias voltage. The effect of the laser noise on the analog signal modulation during the video modulation is eliminated by monitoring of incident laser beam. The operation stability was improved. The experiment results show that the electro-optic modulator has fine linearity and high sensitivity.
Keywords:guide mode resonance  poled polymer  electro-optic modulation
本文献已被 维普 万方数据 等数据库收录!
点击此处可从《应用光学》浏览原始摘要信息
点击此处可从《应用光学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号