Selective hydrolysis of cellulose for the preparation of microcrystalline cellulose by phosphotungstic acid

Microcrystalline cellulose (MCC), prepared from natural cellulose through acid hydrolysis, has been widely used in the food, chemical and pharmaceutical industries because of its high degree of crystallinity, small particle size and other characteristics. Being different from conventional mineral acids, phosphotungstic acid (H₃PW₁₂O₄₀, HPW) was explored for hydrolyzing cellulose selectively for the preparation of MCC in this study. Various reaction parameters, such as the acid concentration, reaction time, temperature and solid-liquid ratio, were optimized. Rod-like MCC was obtained with a high yield of 93.62 % and also exhibited higher crystallinity and narrower particle diameter distribution (76.37 %, 13.77–26.17 μm) compared with the raw material (56.47 %, 32.41–49.74 μm) at 90 °C for 2 h with 58 % (w/w) HPW catalyst and a solid-liquid radio of 1:40. Furthermore, HPW can easily be extracted and recycled with diethyl ether for four runs without affecting the quality of the MCC products. The technology of protecting the crystalline region while selectively hydrolyzing the amorphous region of cellulose as much as possible by using HPW is of great significance. Due to the strong Brønsted acid sites and highest activity in solid heteropoly acid, the use of effective homogeneous HPW may offer an eco-friendly and sustainable way to selectively convert fiber resources into chemicals in the future.