Ambipolar organic field-effect transistors on unconventional substrates

In this paper we report on the realization of flexible all-organic ambipolar field-effect transistors (FETs) realized on unconventional substrates, such as plastic films and textile yarns. A double layer pentacene-C₆₀ heterojunction was used as the semiconductor layer. The contacts were made with poly(ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS) and patterned by means of soft lithography microcontact printing (μCP). Very interestingly growing C₆₀ on a predeposited pentacene buffer layer leads to a clear improvement in the morphology and crystallinity of the film so it obtains n-type conduction despite the very high electron injection barrier at the interface between PEDOT:PSS and C₆₀. As a result, it was possible to obtain all-organic ambipolar FETs and to optimize their electrical properties by tuning the thicknesses of the two employed active layers. Moreover, it will be shown that modifying the triple interface between dielectric/semiconductor/electrodes is a crucial point for optimizing and balancing injection and transport of both kinds of charge carriers. In particular, we demonstrate that using a middle contact configuration in which source and drain electrodes are sandwiched between pentacene and C₆₀ layers allows significantly improving the electrical performance in planar ambipolar devices. These findings are very important because they pave the way for the realization of low-cost, fully flexible and stretchable organic complementary circuits for smart wearable and textile electronics applications.