首页 | 本学科首页   官方微博 | 高级检索  
     检索      

FTIR定量分析聚乙二醇/聚乙烯共混物组成
引用本文:吴宏,林志勇,钱浩.FTIR定量分析聚乙二醇/聚乙烯共混物组成[J].光谱学与光谱分析,2006,26(1):70-74.
作者姓名:吴宏  林志勇  钱浩
作者单位:华侨大学材料科学与工程学院,福建,泉州,362021;华侨大学材料科学与工程学院,福建,泉州,362021;华侨大学材料科学与工程学院,福建,泉州,362021
基金项目:福建省创新基金 , 华侨大学校科研和教改项目
摘    要:利用傅里叶转变红外光谱(FTIR)定量分析聚乙二醇/聚乙烯共混物组成,对特征谱带的选择,重叠峰的分离,数据的拟合处理作了详细讨论。采用1 378 cm-1处聚乙烯的复合峰与1 110 cm-1处聚乙二醇的复合峰强度比作为定量分析的基准,利用基于Beer-Lambert定律的理论拟合方程能较好的实现峰强度比与组分浓度的对应关系,可满足聚乙二醇/聚乙烯共混物组分的定量分析的要求。

关 键 词:聚乙烯  聚乙二醇  傅里叶转变红外光谱(FTIR)  定量分析
文章编号:1000-0593(2006)01-0070-05
收稿时间:2004-10-10
修稿时间:2005-02-20

Quantitative Analysis of Two-Component Polymer Blends (PEG/PE) by Infrared Spectroscopy
WU Hong,LIN Zhi-yong,QIAN Hao.Quantitative Analysis of Two-Component Polymer Blends (PEG/PE) by Infrared Spectroscopy[J].Spectroscopy and Spectral Analysis,2006,26(1):70-74.
Authors:WU Hong  LIN Zhi-yong  QIAN Hao
Institution:College of Materials Science and Engineering, Huaqiao University, Quanzhou 362021, China
Abstract:The concentration of the component of PEG/PE blends was analyzed quantitatively by infrared spectrascopy. The absorption peak area ratio of the selected mixture peaks used as the calibrating basis for the quantitative analysis was more reasonable than the peak area ratio of the pure peaks. The theoretical equation deducted by Beer -Lamber law was used to establish the working curve to calculate the composition of the responding functional groups in the film of the PEG/PE blends. The characteristic peaks of the crystal can not be selected as the calibrating basis for the quantitative measurement, because the crystallization has a great effect on the intensity of the absorption peaks.
Keywords:Polyethylene  Poly(ethylene glycol)  FTIR  Quantitative analysis
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《光谱学与光谱分析》浏览原始摘要信息
点击此处可从《光谱学与光谱分析》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号